
How to Fix Solar Panel Issues Without Losing SREC Income
By Team Faseeh Lall
A solar system rarely fails all at once. It fades. Output slips a little in one month, then a little more, and nothing on the roof looks broken. That slow fade is exactly what costs owners money, because solar renewable energy credits (SRECs) are issued only for the electricity your system actually generates. Every 1,000 kWh your system does not produce is one credit that is never issued, and in Washington, D.C. a 2026 credit is currently priced at $350 on Flett Exchange, for both Sell Now and settlement.
So solar panel issue resolution is not a repair topic. It is an income topic. The owners who protect their SREC income best are not the ones with the newest panels. They are the ones who spot a problem early, work out what it is, fix it properly, and check that generation has come back. This guide gives you that workflow in five steps, then walks through the six most common issues, what each one looks like, and when to call a professional instead of fixing it yourself.
The 5-step issue resolution workflow
Use the same five steps for every fault, big or small. It keeps small problems from turning into months of lost production.
Spot the warning signs. Check your monitoring app at least once a month and compare generation with the same month last year, not with last week. A sudden drop, a flat line on a sunny day, or an inverter error code are all warning signs. So is a higher electricity bill with no change in how much power you use.
Pinpoint the fault. Work out whether the problem is the panels, the inverter, the wiring, or the surroundings. The sections below show how to tell them apart. Note the date, the symptoms, and any error codes exactly as shown. That record matters later if a warranty claim is needed.
Decide: fix it yourself or call a professional. Cleaning, clearing shade, and restarting an inverter are owner jobs. Anything involving the roof, the wiring, or the inside of the inverter is a professional job. If you are unsure, treat it as a professional job.
Fix it and record it. Whatever the fix is, keep the record: photos of the fault, the date it was found, what was done, and who did it. Service records are the evidence a warranty claim needs, and they are also the proof that a fault was fixed rather than ignored.
Verify generation is back. After any fix, watch the monitoring app for a full sunny week. If output is back to its normal level, the issue is resolved. If it is not, the first fix was not the whole answer, and the fault needs a second look.
Issue 1: Output drops for no visible reason
Symptoms: Generation falls on clear, sunny days while the panels look clean and undamaged. No error code shows on the inverter.
Likely causes: A failing string of panels, a degrading inverter, a loose connection, or a panel that has developed an internal fault such as a hot spot.
How to resolve it: Start with the monitoring app. If your system reports per-panel data, look for one panel or one string producing far less than the rest. That narrows the fault to a single place. Then check the inverter display for a warning, even a minor one. If one panel is clearly the outlier, book a professional inspection. Do not climb on the roof to test it yourself. If you want to know what a professional inspection covers, read what a solar panel hot spot check looks like and what an inverter inspection checks.
Issue 2: The inverter shows an error code
Symptoms: The inverter display or app shows an error code, a red light, or a "standby" message, and generation stops or falls sharply.
Likely causes: Grid faults, overheating, a DC wiring fault, or an internal inverter failure. Some codes clear after a restart. Others point to a fault that needs a technician.
How to resolve it: Write down the exact code first, then try one restart: switch the inverter off, wait 30 seconds, and switch it back on. If the code clears and generation returns, note the date and the code and keep watching. If the code returns, or the inverter will not restart, stop there and call a professional. Never open the inverter casing. Inverter faults are the most common cause of sudden, total generation loss, so every day the inverter is down is a day of credits not being earned.
Issue 3: Hot spots on a panel
Symptoms: One area of a panel looks darker or discoloured, or feels noticeably warmer than the rest of the array. The monitoring app may show that panel producing less than its neighbours.
Likely causes: A cracked cell, a failed bypass diode, heavy local shading, or dirt baked onto one spot. Hot spots matter because they can damage the panel permanently if they are left alone.
How to resolve it: Clear any visible obstruction first, such as leaves or bird droppings, and watch the panel for a week. If the spot stays, the panel needs a professional test, usually an infrared scan, to confirm whether the cell or the diode has failed. A failed panel under warranty is a product warranty matter, so keep the photos and the test result. The full warning signs are set out in how to detect solar panel hot spots.
Issue 4: Cracked or physically damaged panels
Symptoms: Visible cracks in the glass, a shattered panel, moisture inside the glass layers, or a bent frame after a storm or hail.
Likely causes: Hail, falling branches, high winds, or impact damage. Small surface scratches rarely affect output, but deep cracks let in moisture and can create an electrical hazard.
How to resolve it: Photograph the damage from the ground, note the date of the storm if you know it, and call a professional the same day. Do not touch a cracked panel or the wiring near it. Physical damage from weather is usually outside the product warranty, so check your home insurance as well. For what happens next, see how solar panel repair works. A damaged panel that keeps running at reduced output is still losing you credits every day it is not replaced, so do not wait for the next service visit.
Issue 5: Shading and dirt cutting output
Symptoms: Generation falls gradually over weeks or months, worst at the same time of day. No error code, no visible damage.
Likely causes: A tree that has grown into the array's sun path, new construction nearby, bird droppings, dust, or pollen coating the panels.
How to resolve it: This is the easiest issue to fix, and the most commonly missed. Check for new shade at the time of day when output is lowest, and trim the branch or move the obstruction. Clean the panels with lukewarm water and a soft cloth or soft brush, never a pressure washer and never an abrasive pad. Then compare a full sunny week before and after. If output recovers, the issue is resolved. If it does not, the cause is elsewhere and the five-step workflow starts again at step two.
Issue 6: Loose connections and corrosion
Symptoms: Output that jumps up and down, generation that stops and restarts, or a burning smell near the inverter or a junction box.
Likely causes: A connector that has worked loose in heat or wind, corrosion on a terminal, or a cable damaged by pests or weather.
How to resolve it: A burning smell or any sign of heat damage means switching the system off and calling a professional immediately. Do not tighten or replace electrical connections yourself. Loose connections are dangerous because they can arc, and they are also slow income leaks: a poor connection trims output for months while nothing looks broken. A professional will test the string, replace the faulty connector, and check the rest of the array at the same time.
How a slow fault costs you SREC income
The SREC maths is simple, and that is what makes slow faults expensive. One credit is issued for every 1,000 kWh your system generates. At $350 per D.C. credit, a fault that quietly cuts output for months is not a small loss. It is a pile of credits that were never issued, and credits are never issued for electricity that was never generated. There is no way to claim them back later.
That is why the workflow above starts with monthly monitoring, not with repairs. The cheapest credit you will ever protect is the one you never lose, because you noticed the dip in the first month instead of the sixth. If you want the detail on how that income adds up, read what your solar renewable energy credits are worth.
Warranty, records, and the claim that follows a fix
Some faults end in a warranty claim rather than a simple repair, and the claim is won on the records you kept while resolving the issue. A cracked panel is a product warranty matter. A panel producing below its guaranteed output is a performance warranty matter. A leak at a roof mount or a loose connector from a poor installation is a workmanship matter. Sending the claim to the wrong party is the most common reason claims stall.
Keep the same record set for every issue: the date the fault appeared, the monitoring data showing the drop, photos of the fault, the error codes exactly as shown, and the invoice and report from any professional visit. The full guide to which warranty covers what is in does your solar warranty protect your SREC income. That same record set is also what makes solar warranty coordination straightforward: claims, repairs, and installer communication all run smoother when the documents are already in hand.
If the fault was found during a routine service visit, the service record doubles as claim evidence. That is one reason a documented annual check matters. The 12 maintenance checks that protect your income cover the inspection points that catch most of these issues before they become income losses.
When to call a professional instead of fixing it yourself
Call a professional whenever the job involves the roof, the wiring, or the inverter internals, whenever a fault code does not clear after one restart, whenever you smell burning or see heat damage, and whenever the fault is on a panel you cannot safely reach from the ground. A professional visit also gives you the test results and the written record a warranty claim needs, so the visit and the claim support each other. If you would rather have the annual checks and the record-keeping handled by one team, SAMS offers system maintenance services. Registration matters too: credits cannot be issued at all until a system is certified and registered, so confirm yours on the Washington, D.C. SREC market page.
Solar panel issue resolution is a routine, not an emergency. Check generation monthly, work through the five steps when something changes, fix what you can safely fix, and get a professional for the rest. The system will keep producing, and the credits will keep coming.
FAQs
How do I know if my solar panels have an issue?
Check your monitoring app monthly and compare generation with the same month last year. A sudden drop, a flat line on a sunny day, an inverter error code, or a higher electricity bill with no change in usage are all warning signs. A single panel producing far less than its neighbours is the clearest sign of a local fault.
Can I fix solar panel issues myself?
Some, yes. Cleaning panels, clearing shade, and restarting an inverter once are safe owner jobs. Anything involving the roof, the wiring, or the inside of the inverter is a professional job. If you are unsure, treat it as a professional job.
How long does solar panel issue resolution take?
A cleaning or shading fix can restore output the same day. An inverter fault that needs a part can take days, and a warranty claim can take weeks. That is why noticing the fault early matters so much: the clock on lost SREC income starts the day the fault appears, not the day it is fixed.
Does a solar panel fault affect my SREC income?
Yes, directly. Solar renewable energy credits are issued only for electricity your system actually generates, so every kilowatt-hour lost to a fault is a fraction of a credit that is never issued. At $350 per D.C. credit at settlement, even a modest output loss adds up over a year.
Who do I contact first: the installer or the manufacturer?
It depends on the fault. Panel defects and output below the guaranteed floor go to the manufacturer. Installation faults such as leaks at roof mounts or loose connectors go to the installer. If you are unsure, start with the installer: they can test the system and tell you which warranty applies.
SAMS (Solar Asset Management Services) is an SREC broker and solar asset management company based in Washington, D.C. Contact SAMS at support@samsmd.com or 240-320-6468.