
Does Your Solar Warranty Protect Your SREC Income?
By Team Faseeh Lall
Your solar panels carry a promise, and that promise is worth real money. Every 1,000 kWh your system generates creates one solar renewable energy credit (SREC), and in Washington, D.C. a 2026 credit currently sells for about $380. So when a panel underperforms or an inverter fails, you lose twice: higher electricity bills and fewer credits to sell.
That is why your solar panel warranty matters more than most owners realise. It is not paperwork to file away. It is the document that decides whether a fault costs you a phone call or a new panel, and whether lost production stays a small dip or becomes months of missing SREC income. The problem is that a solar system does not have one warranty. It has three, from different parties, covering different failures, for different lengths of time. Owners who mix them up are the ones who find out too late that the fault they have is not the one that is covered.
This guide explains each warranty in plain language, shows how each one connects to your SREC income, and sets out the claim steps and records that make a claim succeed.
Your system has three warranties, not one
Most owners think of "the warranty" as a single promise. In practice, three separate warranties apply to a home solar system, and a fourth covers the inverter.
Product warranty. From the panel manufacturer. It covers defects in the panel itself, such as delamination, junction box failure, cracked backsheets, frame corrosion, and cell defects. Typical length: 12 to 25 years, depending on the brand and model.
Performance warranty. Also from the panel manufacturer. It covers output, not physical failure. It guarantees that the panel will still produce at least a stated share of its rated power after a set number of years. Typical length: 25 to 30 years, with a guaranteed floor of about 80 to 87 percent of rated output at the end of the term.
Workmanship warranty. From the company that installed the system. It covers the quality of the installation: mounting, wiring, roof penetrations, and flashing. Typical length: around 10 years, though it ranges from 1 to 25 years between installers.
Inverter warranty. Separate again, usually 5 to 12 years depending on the brand and model.
Knowing which warranty applies is the first step of any claim. A cracked panel is a product warranty matter. A panel that still looks fine but produces well below its guaranteed output is a performance warranty matter. A leak where the mounts meet the roof is a workmanship warranty matter. Sending a claim to the wrong party is the most common reason claims stall.
What the product warranty covers, and what it does not
The product warranty covers faults that start in manufacturing. If a panel delaminates, a junction box fails, or cells develop defects without any outside cause, the manufacturer repairs or replaces the panel.
It does not cover damage from outside the panel. Accidents, vandalism, fire, hail, and high winds fall outside it, as do unauthorised modifications, installation by a non-approved fitter, and failure to carry out required maintenance. That last exclusion is the one owners miss most often. If your warranty paperwork expects reasonable upkeep and you cannot show any service record, a claim can be refused even when the fault itself looks like a defect. Keeping the annual service record from your 12 maintenance checks is not just good practice; it is evidence for a claim.
Two practical checks protect you here. First, buy through an authorised dealer and keep the original invoice with the panel serial numbers. Manufacturers verify serial numbers, and a panel bought through grey-market channels can be close to worthless when a claim is filed. Second, read the warranty sheet for your exact model code. Terms differ between models from the same brand, and the datasheet for the panel on your quote is the only document that counts.
What the performance warranty actually guarantees
The performance warranty is the one most directly tied to your SREC income, because it is the only warranty that promises output. A typical curve is about 1 percent loss in the first year and about 0.4 percent per year after that, ending near 87 percent of rated power at year 30 on current premium panels. Older panels commonly guarantee 80 to 85 percent at year 25.
That guarantee has a catch owners should understand. It does not mean the manufacturer replaces your panel if output simply falls. You must provide independently measured proof, usually an I-V curve test with calibrated equipment, showing output has dropped below the warranted floor. A monitoring app showing lower generation is a warning sign, not proof. It tells you something is wrong and that a professional test is worth booking, but the claim itself needs the test result.
This is where the SREC connection becomes concrete. Solar renewable energy credits are issued only for electricity your system actually generates, so a panel quietly producing below its guaranteed output is a panel quietly producing fewer credits. At about $380 per D.C. credit, even a modest output loss adds up over a year, and a performance fault left unproven for a year is a year of credits you never get back. If you want the detail on how that income adds up, read what your solar renewable energy credits are worth. The lesson is simple: watch generation monthly, act on a dip early, and get the test done while the evidence is fresh.
The workmanship warranty: the one most owners forget
The workmanship warranty comes from your installer, not the panel maker, and it covers the installation itself. Roof brackets and waterproofing, cable routing, electrical connections, and the mounting of the inverter all sit under it. A leak at a roof penetration, a loose connector, or a mounting rail that works free in the wind is a workmanship matter, and it should go to the installer first.
Workmanship terms vary more than panel warranties, so check yours before you need it. Some installers cover 10 years, some far less, and some require servicing by an approved installer to keep the cover valid. That last condition is worth checking before you book any third-party repair: an unauthorised repair can void the workmanship cover entirely.
Workmanship faults also hit SREC income in a quiet way. A loose connector or a badly sealed mount rarely stops a system outright. It trims output for months while nothing looks broken, and every lost kilowatt-hour is a fraction of a credit that never gets issued. The 5 costly SREC mistakes owners make include exactly this kind of slow, unnoticed loss. A documented annual service visit is the cheapest way to catch it, and the service record doubles as the evidence your workmanship claim will need.
How each warranty protects your SREC income
Put together, the three warranties protect your SREC income in different ways.
The product warranty protects it by replacing panels that fail physically, so a defect does not become a dead string. The performance warranty protects it by guaranteeing a floor under your output, so gradual degradation below that floor becomes a claimable fault instead of a loss you absorb. The workmanship warranty protects it by making the installer responsible for the installation faults that cause slow, silent output loss.
None of them protects income on its own. All three depend on you noticing the problem, proving it, and claiming in time. Registration matters just as much: credits cannot be issued at all until a system is certified and registered, however well it is maintained or warranted. If you are unsure about yours, confirm it on the Washington, D.C. SREC market page, which carries current market details and the steps to check registration.
How to file a warranty claim in 5 steps
Identify which warranty applies. Panel defect, output below the guaranteed floor, or installation fault. This decides whether you contact the manufacturer or the installer.
Gather your records. Original invoice, panel serial numbers, warranty sheets for your exact models, monitoring data showing the problem, and service records from professional visits.
Report the fault in writing. Describe what happened, when it started, and what you have observed. Note any error codes exactly as shown. Keep a copy of everything you send.
Get the proof the warranty asks for. For a performance claim, that usually means an independent I-V curve test. For a product claim, photos and the serial number. For a workmanship claim, the installer's own inspection.
Follow up and keep the timeline. Claims move slowly, and a written record of dates protects you if a deadline or a dispute arises. If the claim is refused, ask for the reason in writing; a refusal based on missing records can sometimes be fixed by supplying them.
One warning: never arrange a repair yourself before the claim is assessed unless the fault is dangerous. An unauthorised repair can void the cover you are trying to use, and the cost of the repair can fall on you.
The records that make a claim succeed
A warranty claim is won on paperwork as much as on the fault itself. Keep these in one place from the day the system is installed.
The original invoice with panel and inverter serial numbers.
The warranty sheets for your exact panel and inverter models.
The installer's workmanship warranty terms.
Monitoring exports or screenshots showing generation over time.
Service records and test results from every professional visit.
Photos of the array from installation day, so later damage can be dated.
This is the same record set that supports solar warranty coordination: claims, repairs, and installer communication all run smoother when the documents are already in hand. Owners who keep them rarely argue about a claim. Owners who do not spend the claim arguing about paperwork instead of the fault.
When to call a professional instead of claiming
Not every problem is a warranty claim, and not every claim should be filed alone. Call a professional whenever the job involves the roof, the wiring, or the inverter internals, and whenever a fault code does not clear. A professional visit also gives you the test results and the written record a claim needs, so the visit and the claim support each other. SAMS offers system maintenance services for owners who would rather have the annual checks and the record-keeping handled by one team.
A warranty is a safety net, not a maintenance plan. It pays for the faults it covers, but only if you notice them, prove them, and claim them. The owners who protect their SREC income best are the ones who treat the warranty, the maintenance checks, and the monitoring app as one routine: watch generation, keep records, and act on the first sign of a problem.
FAQs
What is a solar panel warranty?
A solar panel carries two manufacturer warranties: a product warranty against defects, typically 12 to 25 years, and a performance warranty guaranteeing a minimum output over 25 to 30 years. The installer adds a separate workmanship warranty, commonly around 10 years.
Does my solar panel warranty cover lost SREC income?
No warranty pays for lost SREC income directly. What the warranties do is pay to fix the fault that caused the lost production, and the performance warranty guarantees a floor under your output. The income protection comes from noticing the fault early and claiming promptly, because solar renewable energy credits are only issued for electricity actually generated.
How do I claim under a performance warranty?
You need independently measured proof, usually an I-V curve test with calibrated equipment, showing output below the guaranteed floor for your panel's age. Monitoring data shows the problem; the test proves it. Contact the manufacturer with the test result, the serial number, and your purchase records.
What voids a solar panel warranty?
Common causes are unauthorised modifications, installation or repair by a non-approved fitter, failure to carry out required maintenance, and damage from accidents, fire, hail, or high winds. Always check the warranty sheet for your exact model before arranging any work.
How long do solar panel warranties last?
Product warranties typically run 12 to 25 years and performance warranties 25 to 30 years, depending on the brand and model. Some premium panels now carry 30-year performance cover. Inverter warranties are separate, usually 5 to 12 years, and workmanship warranties depend on the installer.
SAMS (Solar Asset Management Services) is an SREC broker and solar asset management company based in Washington, D.C. Contact SAMS at support@samsmd.com or 240-320-6468.