Skip to content
SAMS

SREC Owners: 12 Maintenance Checks That Protect Your Income

By Team Faseeh Lall

Solar renewable energy credits (SRECs) are paid on production: every 1,000 kWh your system generates creates one credit, and in Washington, D.C. a 2026 credit currently sells for about $380. That makes maintenance an income job, not just a housekeeping job. Every check on this list protects two earnings at once, the electricity you use and the credits you sell.

Panels rarely fail loudly. They lose output quietly: a layer of grime here, a loose connection there, a small fault that sits unnoticed for months. By the time the electricity bill shows it, the lost production is already gone, and so are the credits that production would have created.

This checklist covers 12 checks, split into monthly owner checks, seasonal checks, and an annual professional visit. None of them needs specialist tools from the owner. The point is simple: catch small problems while they are still small, and your SREC income stays where it should be.

Monthly checks (owner, no roof access needed)

1. Check your generation in the monitoring app

Open your inverter or monitoring app once a month and look at daily generation, not just the monthly total. A sudden dip on a sunny day is the earliest warning you will get. Compare the figure with the same month last year if the app keeps history. A steady downward drift over several months is worth a closer look even if no alert has fired.

2. Do a ground-level visual check

Stand on the ground and look at the array. You are checking for cracked glass, slipped panels, debris sitting on the glass, bird nests under the panels, and any panel that looks visibly different from its neighbours. Binoculars help. Never climb onto the roof to look closer; a cracked panel can hide damage that only a professional should handle.

3. Check the inverter, not just the panels

The inverter is the part of the system most likely to need attention, and it usually tells you when something is wrong. Look at its display or status lights: green and generating is normal, red or flashing needs a look at the manual and, if the fault does not clear, a call to your installer. Note any error code exactly as shown; it saves time when you report it.

4. Look for new shading

Trees grow and neighbours build. A branch that was clear of the array last year may now shade a row of panels for part of the day. Walk around the property once a month and note anything new that casts a shadow on the roof. Shading on even a small part of a string can cut that string's output well beyond the shaded area, so trimming a branch early is one of the cheapest maintenance jobs there is.

Seasonal checks

5. Clean the panels after the dusty season

Pollen in spring, dust in a dry summer, and leaves in autumn all sit on the glass and block light. For most homes, a clean once or twice a year is enough, timed after the worst of the pollen or dust season. Use plain water and a soft brush or sponge from the ground with a long handle, early in the morning or late in the evening when the panels are cool. Never use a pressure washer, harsh detergents, or abrasive pads; they can damage the coating and seals. And never walk on the panels.

If the roof is steep, high, or hard to reach safely, leave the cleaning to a professional. A cleaning service costs less than a fall.

6. Inspect after every major storm

High wind, hail, and heavy snow are the moments when damage happens. After a storm, repeat the ground-level visual check and the generation check from steps 1 and 2. Look for panels that have shifted, mounting rails that look bent, and debris caught under the array. If generation has dropped after a storm and nothing is visible from the ground, book a professional inspection rather than waiting for the next monthly check.

7. Clear leaves and check drainage in autumn

Leaves piled against the lower edge of an array hold moisture against the frame and the roof. Clear them, and check that gutters and drainage around the mounts are not blocked. Water that pools around mounting points finds its way into small gaps over time, and roof leaks under a solar array are harder and more expensive to fix than the same leak on an open roof.

8. Let snow slide, do not chip it off

Snow usually slides off tilted panels on its own once the sun hits them. Do not climb up to clear it, and never chip at ice on the glass; the risk to the panel and to you is not worth the day or two of generation you might recover. If snow sits for an unusually long time, a generation dip for a few days is normal and the panels will recover when it clears.

Annual checks (professional servicing)

9. Get the wiring and connections checked

Once a year, a qualified technician should check the DC wiring, connectors, junction boxes, and isolators. Connections loosen slowly with heat cycling, and a loose connector is both a fire risk and a source of lost output. This is not an owner job: DC voltages in a solar array are high enough to be dangerous, and the check needs the system safely isolated first.

10. Have the inverter tested properly

Alongside the wiring check, the technician should test the inverter itself: fault history, voltage output, cooling fans, and firmware. Inverter problems are the most common reason a system underperforms, and they are also the problem most likely to be caught early by a proper annual test. Ask for the test results in writing so you have a year-on-year record.

11. Check mounting hardware and roof seals

Mounts, bolts, and flashing take the weather every day of the year. An annual check confirms nothing has worked loose and the seals around roof penetrations are still sound. Catching a loose mount early is a small tightening job; catching it late can mean a panel moving in the wind and damage to the roof underneath. This is also the right moment to raise any warranty coordination questions, since a documented annual service record supports a claim if one is ever needed.

12. Ask for a thermal scan or performance review

A thermal imaging scan finds hot spots and failing cells that no visual check can see. If a full scan is not practical, ask your technician for a performance review instead: actual generation against expected generation for your system size and location. Either way, you leave the visit with a clear answer to one question: is this system producing what it should?

What maintenance costs versus what neglect costs

Maintenance costs vary with system size, roof access, and region, so any fixed figure would be misleading. What is consistent is the comparison: a yearly professional visit and the odd clean are routine, predictable costs. Neglect is not. A failed inverter found a year late, a roof leak under an array, or months of reduced output from a fault nobody noticed all cost more than the maintenance that would have caught them, and they cost in two ways at once: higher bills and fewer credits.

That second cost is easy to miss. Every 1,000 kWh your system generates creates one solar renewable energy credit, and in Washington, D.C. a 2026 credit currently sells for about $380. Lost production is lost credit income, not just lost bill savings. Owners who want the detail on how that income adds up can read "what your solar renewable energy credits are worth", and the "five costly SREC mistakes " that quietly eat the same income.

Maintenance and your SRECs

Maintenance and SREC income are the same job seen from two sides. The credits are only issued for electricity the system actually generates, so anything that trims generation trims the credits too. A dirty array, a shaded string, or an inverter fault does not just raise your bill; it shrinks the pile of credits you can sell. Keeping the system healthy is therefore the most reliable way to protect SREC earnings, and it costs nothing beyond the checks above.

Registration matters just as much. If a system was never certified and registered, no credits are issued at all, however well it is maintained. If you are unsure about your own registration, check the "Washington, D.C. SREC market page " for current market details and the steps to confirm your system is registered.

When to call a professional

Call a professional, rather than checking yourself, whenever the job involves the roof, the wiring, or the inverter internals. That covers storm damage you can see from the ground, any fault code that does not clear, a sudden generation drop with no visible cause, and anything involving water near the array. If your system is under warranty, check the warranty terms before arranging work: some warranties require servicing by an approved installer, and a documented service history makes warranty coordination much smoother. SAMS offers "system maintenance services " for owners who would rather have the annual checks handled by one team.

FAQs

How often should solar panels be maintained?

Monthly owner checks, seasonal cleaning and post-storm checks, and one professional service a year. That rhythm catches most problems early without turning maintenance into a chore.

Can I clean my own solar panels?

Yes, from the ground, with plain water and a soft brush, when the panels are cool. Never use a pressure washer or detergents, never walk on the panels, and leave steep or high roofs to a professional.

Does maintenance affect my solar renewable energy credits?

Yes. Credits are issued per 1,000 kWh generated, so anything that reduces generation reduces the credits you earn. In D.C., where a 2026 credit is worth about $380, even a small output loss adds up over a year.

What maintenance does my warranty require?

It depends on the warranty. Most panel and inverter warranties expect reasonable upkeep and may ask for evidence of servicing if a claim is made. Read your warranty paperwork and keep records of professional visits.

When should I call a professional instead of checking myself?

Whenever the work involves the roof, the wiring, the inverter internals, or anything you cannot safely reach from the ground. Storm damage, persistent fault codes, and sudden generation drops are all professional jobs.