Skip to content
SAMS

How to Sell SRECs in Washington, DC

By Team Faseeh Lall

Owning solar panels in Washington, DC can create value in two ways. The first is the electricity itself, which reduces what a property needs to buy from the grid. The second is a Solar Renewable Energy Certificate, or SREC, which is created for qualifying solar generation that has been properly recorded. Selling that certificate is a separate step from generating the electricity, and it is the step where owners most often lose value, not because the system failed, but because the records, the timing, or the sale route were not checked first.

This guide explains how to sell SRECs in practical order: what must be true before a sale, what to check about the certificates you hold, how to choose between selling routes, and how to close the sale so the payment matches the certificates sold. It is written for DC solar owners. It does not quote prices, because SREC prices move, and any price in a guide like this would be out of date by the time an owner acted on it. Check current market figures at the time of sale instead.

Before you sell: what must already be true

A certificate cannot be sold before it exists, and it does not exist simply because a system produced electricity. The chain has a fixed order, and a sale that skips a step creates a record that will not reconcile later.

First, the system must be registered for the DC SREC programme, with its generation recorded in PJM's Generation Attribute Tracking System, commonly called GATS. GATS creates and tracks the electronic certificates associated with qualifying generation. Second, the generation behind a certificate must be metered and recorded for the right period. Third, the certificate must actually have been created in GATS before it is offered for sale.

If any of those links is missing, the correct first step is not to find a buyer. It is to close the gap in registration or recording, so that the generation an owner wants to sell is backed by a certificate that exists in the system. An owner who tries to sell generation that has not yet been recorded as a certificate is selling something the records cannot yet support.

Step 1: confirm what you actually hold

Before talking to any buyer, an owner should be able to answer three simple questions about their own account.

How much generation is recorded?

Start with metered generation for the period in question, and compare it with what the monitoring data shows. If the two do not agree, find out why before selling. A monitoring gap, a meter reading recorded in the wrong period, or generation that was never entered into GATS will each produce a different fix, and each fix is easier while the period is still recent.

How many certificates exist for that generation?

One certificate corresponds to each megawatt-hour, or 1,000 kilowatt-hours, of qualifying solar electricity recorded in the system. That arithmetic is the check that keeps a sale honest: the certificates an owner offers should match the generation the records support, no more and no less. Selling more certificates than the records support creates a shortfall that will surface later. Leaving certificates uncreated because generation was never properly recorded leaves value sitting unclaimed.

Are any certificates already committed?

Certificates that have already been sold, transferred, or committed under an existing arrangement must not be offered again. This is the easiest mistake to make when records live in more than one place. One inventory, kept current, prevents a double sale.

Step 2: understand the selling routes

Most DC owners sell through a broker or an aggregator rather than finding an individual buyer themselves. The two routes are not the same, and the choice between them is a real decision, not just a difference in name.

A broker typically arranges the sale of an owner's certificates to a buyer, for a brokerage fee or under an agreed arrangement. An aggregator typically pools certificates from many owners and sells them together. Either route can be the right one for a given owner, depending on how many certificates are involved, how much involvement the owner wants, and what terms are on offer.

Within either route, there is a second choice: selling on the spot market or at an agreed rate. A spot sale takes the market figure at the time of sale. An agreed rate fixes the figure in advance for the certificates covered by the agreement. Neither is automatically better. A spot sale leaves the owner exposed to whatever the market does next. An agreed rate removes that uncertainty for the covered certificates, but it also means the owner does not benefit if the market rises afterwards. Owners should ask, in plain terms, which of these they are being offered, what it covers, and what happens if the market moves either way.

Step 3: compare offers on the terms that matter

When comparing offers, the headline figure is only one part of the comparison. An owner should also ask about the parts that decide what actually arrives in their account.

First, what is the brokerage or service fee, and is it charged per certificate, as a percentage, or under some other arrangement? SAMS provides SREC brokerage for DC solar owners, including a 0% brokerage option, and owners comparing routes should ask every provider the same fee question in the same terms, so the comparison is like for like.

Second, what exactly is being sold, which certificates, for which generation period, and in what quantity? An offer that does not name the certificates it covers cannot be reconciled afterwards.

Third, when and how is payment made, and what record will the owner receive? Payment terms vary by provider and by arrangement, so an owner should not assume a timing that was not stated. Ask for it in writing, and keep it with the sale record.

Fourth, who is responsible if a certificate record does not reconcile, for example, if a certificate was recorded in the wrong period or a meter reading is later corrected? Knowing where that responsibility sits before the sale is much cheaper than discovering it during a dispute.

An offer that cannot answer these questions clearly is incomplete, and an owner should not accept it until the answers are on the record.

Step 4: make the sale, then reconcile it

Once the route and the terms are settled, the sale itself should be straightforward: the agreed certificates are transferred or sold under the agreed arrangement, and the owner receives a record of what was sold.

The step owners most often skip comes after that, and it is the step that protects them. Reconcile the sale. Match the payment received back to the certificates sold, and match the certificates sold back to the generation recorded for the period. If all three agree, the owner has a clean account for that period. If they do not, the mismatch is useful information in itself: it may point to a data gap, a timing difference, a certificate recorded in the wrong period, or a payment that covers a different set of certificates than the owner expected. Each of those has a different fix, and finding the right one starts with noticing the mismatch while the sale is still recent.

Keep the whole file together: generation data, meter readings, certificate records, the sale agreement or confirmation, and the payment record, all dated. That file is what supports any later question about the sale, and it is what a future buyer of the property will want to see if the system changes hands.

Common mistakes that cost owners

The same few mistakes appear again and again, and all of them are avoidable with the checks above.

Selling before the certificate exists is the first. Generation that has not been recorded in GATS is not yet a certificate, however real the electricity was.

Selling the same certificate twice is the second. It happens when records are scattered across accounts and spreadsheets, not when an owner deliberately double-sells.

Accepting a headline figure without asking about fees and payment terms is the third. The figure that matters is what arrives in the owner's account, for which certificates, and when, not the figure quoted before fees and terms are applied.

Skipping reconciliation is the fourth. A sale that is never matched back to generation and payment is a sale that cannot be proven, and an unproven sale is the one that causes trouble months later.

Finally, treating a sale as a one-off event rather than a routine is a mistake in itself. Systems keep generating, certificates keep being created, and each period needs the same short routine: confirm generation, confirm certificates, choose the route, sell, and reconcile.

A short checklist before every sale

  1. System registered and generation recorded in GATS for the period.

  2. Certificates created match metered generation, one certificate per megawatt-hour of qualifying generation.

  3. No certificate already sold, transferred, or committed is offered again.

  4. Route chosen deliberately: broker or aggregator, spot market or agreed rate.

  5. Fee, certificates covered, and payment terms stated in writing.

  6. Payment matched back to certificates sold, and certificates matched back to generation.

Key takeaways

Selling SRECs is a process, not a single transaction. The electricity must first be recorded as qualifying generation, the generation must then exist as certificates in GATS, and only then can those certificates be sold with confidence. The route, broker or aggregator, spot or agreed rate, should be chosen on its full terms, including fees and payment, not on a headline figure alone. And every sale should end with reconciliation, matching payment to certificates and certificates to generation, so the owner's records stay clean period after period.

For DC owners, that discipline is what turns a system on the roof into income the records can prove. Generation earns the certificate. Clean records make the certificate sellable. A careful sale makes sure the owner is paid for exactly what the system produced, no more, and no less.

SAMS, Solar Asset Management Services, Washington, DC, provides SREC brokerage, production monitoring, maintenance and repair coordination, and inspections. Website: samsmd.com | Phone: +1 240-320-6468.